2111 Gripper
TYPE HGZ
Angular-Gripper

Cylinder bore diameter 16 mm
This angular gripper has a high gripping force. It is double-acting and can be used as inside or outside gripper. It is used to grip and hold parts. The holding force should be 10 to 20 times the part weight. The gripper jaws which activated by a piston rod are moved simultaneously and centered, so that the gripping moment is kept constant over the whole opening and closing angle. The two air connections (M5) are located on the end opposite the grippers. Monitoring by way of proximity switches is also possible.

6111 Clamping Units
TYPE SD Spring Loaded Clamping Slide

Design size 10
Pressure spring loaded linear guide with manual spring force adjustment.

6121 Clamping Units
TYPE SZ
Linear Ball Guide

Design size 10
Tension spring loaded linear guide with manual spring force adjustment.